For the box: To release the spigot, push in the cardboard tab (applying pressure on the inside edges of the dotted area). Pull the spigot out of the opening and push the tab back in to hold it in place. Carefully remove the safety seal from the valve by pulling on the small red stem. Gently press the top of the spigot with your thumb. Make sure that any receptacles you want to fill are clean and dry. If necessary, use a funnel to make it easier to pour the liquid.
For the product: See table for dosing instructions. For tough stains, pour a small quantity directly on stain and rub or allow soaking before washing. Always check labels for special instructions.
FORMULATED FOR COLD WATER. KEEP OUT OF REACH OF CHILDREN.